Accidentally hitting a utility line during a project can lead to costly repairs and create hazardous public safety situations. Digging in the wrong place can also lead to unnecessary delays and costs for your project, and ultimately, your company. Avoid this disruption with the rugged and durable Amprobe UAT-600 Series, designed to accurately pinpoint underground utilities and buried services up to 100 feet deep with accurate depth measurement to 20 feet.
The locating kit comes complete and ready for use with a Transmitter, Receiver, test lead kit, batteries and additional fuses, all in a mobile, protective duffle bag. The UAT-620 kit also includes a Signal Clamp for transmitting a signal when it is not possible to make electrical contact with the cable to be traced. For applications where ground fault locating is required, use the UAT-600 Transmitter in combination with the optional A-Frame accessory.
|
Specifications: Amprobe UAT-610
Underground Utilities Locator Kit |
|||
|
Features |
UAT-600-R Receiver |
UAT-600-T Transmitter |
SC-600 Signal Clamp (included with
UAT-620, optional for UAT-610) |
|
Measurement category |
CAT IV 600 V |
|
|
|
Operating voltage/current |
0 to 600 V |
|
0 to 600 V, 100 A max. |
|
Operating frequency/tracing modes |
Active tracing: 33 kHz and 8 kHz
Passive tracing: 50/60 Hz and Radio |
Energized circuit |
33 kHz and 8 kHz |
|
Locating modes |
Peak and Null |
- |
- |
|
Depth measurement and accuracy |
Up to 20 ft |
- |
- |
|
|
4 in to 10 ft: pm; 3 % |
|
|
|
|
10 ft to 20 ft: pm; 5 % |
|
|
|
Display backlight |
Automatic |
Yes |
- |
|
Audio indication |
Increasing closer to the signal |
Fast beeps showing the better
signal is applied |
- |
|
Transmitting mode power output |
- |
Max. 3 watts |
- |
|
Output voltage |
- |
Max. 50 V rms |
- |
|
Output current |
- |
Max. 250 mA rms, constant current in
5 steps |
- |
|
Output current |
- |
- |
23 V rms at 8 kHz 30 V rms at 33 kHz |
|
Mains voltage measurement |
- |
0 V to 600 V, 50 Hz to 60 Hz |
|
|
Resistance measurement (De-energized
circuit) |
- |
0 ohm; to 999 k ohm; |
|
|
Output hazardous voltage warning |
- |
≥ 30 V rms |
- |
|
Mains hazardous voltage warning |
- |
≥ 30 V rms |
- |
|
Sensitivity adjustment (gain control) |
Yes |
- |
- |
|
Sensitivity at 1 m (typical) |
Power: 2 mA |
|
|
|
Display |
4.3 in, 320 x 240 BW outdoor LCD display
with auto backlight |
LCD display (LED backlight) 2.4 in x 1.3 in |
|
|
Update rate |
Instantaneous |
Current (mA): 10 ms |
|
|
Operating temperature and humidity |
-4 °F to 122 °F (-20 °C to 50 °C),
≤90% RH |
|
|
|
Storage temperature and humidity |
-40 °F to 140 °F (-40 °C to 60 °C),
≤90% RH |
|
|
|
Operating altitude |
< 6561 ft (< 2000 m) |
|
|
|
Water and dust resistance |
IP54 |
|
|
|
Drop proof |
3.28 ft (1 m) |
|
|
UAT-600-R Receiver
UAT-600-T Transmitter
CC-UAT-600 Carrying Case
TL-UAT-600 Test Leads Kit (black test lead with detachable black alligator clip,
red test lead with permanently attached red alligator clip, ground stake)
SC-600 Signal Clamp
2 x FP-UAT-600 Replacement Fuses
6 x AA Batteries
8 x D Batteries
